Ring - Corghi HD 1300 Manuel D'utilisation

To remove it, fix it to the turntable (Fig. 36)
like a normal rim and break it from the rear.
For a good bead breaking result, both in the
front as well as in the rear, insert the bead
breaker plate between the rim edge and the
bead until just touching the shoulder of the rim.
When the beads come off the rim, the tyre will fall.
Make sure no one is in the work area.
This operation can be extremely dangerous! Perform it manually if you are absolutely
certain you can maintain the wheel equilibrium only.
For heavy, large sized wheels you MUST use a suitable lifting device.
MOUNTING WHEELS
FOR EARTHMOVING
MACHINES AND
WITH A SIDE RING
Move the tyre near the rim, centring it correctly.
Mount the second bead using the bead
breaker tool.
Insert the side ring and lock it with the specific
lock ring (Fig. 38).
HD 1300 / HD 1300 A Operator Manual
CAUTION!
CAUTION!
36
EN
38
101