Use A Universal Cable; Strand Assignment; Assemble Universal Cable - Weinmann WM 24037 Mode D'emploi

3.3 Use a universal cable

3.3.1 Strand assignment

The cable contains two split-wire pairs T and O. The relevant
strands transport different signals depending on the output device.
Output device
Weinmann therapy
device
CAPNOsleep
Analogbox D⁄A
* Depending on the selected jack of the Analogbox D⁄A. For this
purpose, see the instructions for use of the Analogbox D⁄A
and the therapy device.
For therapy devices (apart from SOMNOsmart), assignment of
strands 2 and 3 can be set freely using WEINMANNsupport. Two
of the values in each case can be displayed (see "1.5 Signal outputs
on the therapy devices" on page 33).

3.3.2 Assemble universal cable

1. Select a suitable plug type for your PSG.
Connect PSG connecting lead
1 2 1
T
Strand
2: Insulated strand
3: Insulated strand
1: Bare strands
2: Insulated strand
3: Insulated strand
1: Bare strands
2: Insulated strand
3: Insulated strand
1: Bare strands
Connecting lead PSG
3
O
Signal
"T"
"O"
Ground
Capnogram
etCO
2
Ground
Channel 2/4/6/8 *
Channel 1/3/5/7 *
Ground
EN 39