Publicité
Les langues disponibles
Les langues disponibles
During ironing, the pilot light on the iron automatically switches on/off as the
o
thermostat maintains the set temperature (you may continue ironing during this
process).
Turn the steam control turning knob to the required position.
o
Steam is produced as soon as the iron in held horizontally.
o
SPRAYING
Press the spray button to spray water on clothes, as often as required.
o
NOTE: When using the water spray function, ensure that there is enough water
in the water tank, and you may have to pump the spray button serval times at
first time you use the iron in order to start the spraying function.
BURST OR VERTICAL STEAM IRONING
Press the burst of Steam button to generate a powerful burst of steam that can
o
penetrate the fabrics and smooth the most difficult and tough creases. Wait for a
few seconds before pressing again.
By pressing the Burst of Steam Button at intervals you can also iron vertically
o
(curtain, hung garments, etc.)
NOTE: The burst steam function can only be used at high temperature. Stop the
emission when the pilot light turns on, then start ironing again only after the
pilot light has turned off.
DRY IRONING
For ironing without steam, follow the instruction in section "steam ironing",
o
however, the steam control turning knob should remain in position "OFF" (no
steam).
ANTI‐CALC SYSTEM
o A special filter inside the water tank softens the water and prevents scale build‐up in
the soleplate. The filter is permanent and does not need replacing.
NOTE: Use tap water only. Distilled and demineralized water makes the anti‐
calc system ineffective
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
All manuals and user guides at all-guides.com
by altering its physicochemical characteristics.
Publicité
