Publicité
Les langues disponibles
Les langues disponibles
Equipment Approval Information
Your telephone equipment is approved for connection to the
Public Switched Telephone Network and is in compliance
with parts 15 and 68, FCC Rules and Regulations and the
Technical Requirements for Telephone Terminal Equipment
published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating,
among other information, the US number and Ringer
Equivalence Number (REN) for the equipment. You
must, upon request, provide this information to your
telephone company.
The REN is useful in determining the number of devices
you may connect to your telephone line and still have all of
these devices ring when your telephone number is called.
In most (but not all) areas, the sum of the RENs of all
devices connected to one line should not exceed 5. To be
certain of the number of devices you may connect to your
line as determined by the REN, you should contact your
local telephone company.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant.
Notes
• This equipment may not be used on coin service
provided by the telephone company.
• Party lines are subject to state tariffs, and therefore, you
may not be able to use your own telephone equipment if
you are on a party line. Check with your local telephone
company.
English
Publicité
