Doro MemoryPlus 319ph Mode D'emploi page 10

Connection
Connect the telephone cord to a network wall socket
1.
and to the
Connect the spiral cord to the handset and to the
2.
socket on the base of the telephone.
You will hear a click when the modular plug is
3.
correctly in place.
Lift the handset and listen for the dial tone.
4.
Memories
Saving speed dial numbers
Make sure that the Make sure that the
1.
of the telephone is set to
Lift the receiver and press Lift the receiver and press
2.
anything you hear in the earpiece).
Enter the phone number (up to 16 digits) using the Enter the phone number (up to 16 digits) using the
3.
keypad. Press Press Press
Select memory position by pressing the Select memory position by pressing the
4.
corresponding button.
Replace the handset. The number has now been saved. Replace the handset. The number has now been saved.
5.
Remember to return the
base of the telephone to the
the telephone numbers have been saved.
Press
REDIAL
number.
English
Settings
socket on the back of the telephone.
T
FLASH
.
FLASH
The number has now been saved. The number has now been saved.
FLASH
if you want a pause in the telephone
/ switch on the base
STORE
.
STORE
on the front (ignore
FLASH
/ switch on the
STORE
position when all
FLASH

q
(ignore (ignore