Technoline WS 9060 Mode D'emploi page 20

each time.

When the main device uses the power adapter as its power source, display backlight will be
always lighted up, in this mode, press "COLOR: LOOP" button 1 time, the backlight will
automatically change slowly, you can see more than 70 kinds of color change. Turn on and
stop the function of color change by pressing the "COLOR: LOOP" button. You can also
speed up the color change by holding down the "COLOR: LOOP" button. When the button is
released, the backlight color automatically stops changing and lights up in the current color.
Note:

When the main device uses the power adapter as its power source, it will automatically or
manually enter the DCF time signal receiving, and when the radio wave is received, the
backlight will be automatically switched off to prevent interference with the reception of the
radio wave.

Backlight color: white, red, orange, yellow, green, cyan, blue, purple. If the main device power
is insufficient, the backlight color will have color difference which means you need to change
battery or use the power adapter as soon as possible.
USB Charging Function：

The USB socket on the back of the main device provides DC 5V
handheld mobile device charging.
Hereby, Technotrade declares that this product WS 9060 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The
original EU declaration of conformity may be found at: www.technoline.de/doc/4029665090603
Environmental reception effects
The station obtains the accurate time with wireless technology. Same as all wireless devices, the
reception is maybe affected by the following circumstances:

long transmitting distance

nearby mountains and valleys

near freeway, railway, airports, high voltage cable etc.

near construction site

among tall buildings

inside concrete buildings

near electrical appliances (computers, TV's, etc) and metallic structures

inside moving vehicles
Place the station at a location with optimal signal, i.e. close to a window and away from metal
surfaces or electrical appliances.
Precautions

This main unit is intended to be used only indoors.

Do not subject the unit to excessive force or shock.

Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.

Do not immerse in water.

Avoid contact with any corrosive materials.

Do not dispose this unit in a fire as it may explode.

Do not open the inner back case or tamper with any components of this unit.
EN9
1A output power for