Technoline WS 9060 Mode D'emploi page 19

Note: when no wireless sensor is connected on the channel of the main device, "-" will be displayed
in the temperature and humidity column while the symbol "
Maximum/Minimum Temperature:

The main device automatically records the maximum and minimum values of temperature and
humidity. You can press the "MEM" button to view the maximum and minimum values.

Press "MEM" button one time to view the maximum value and the symbol "MAX" displays.

Press "MEM" button two times to view the minimum value and the symbol "MIN" displays.

Press "MEM" button three times to return the current value.

Holding the "MEM" key for 2 seconds, the main device will erase the maximum and minimum
records of the temperature and humidity, temperature and humidity value will show "--" for 2
seconds then return to show the current value.
Frost Warning:

The main device receives the OUTDOOR temperature in -1.0 ~ +2.9 °C range, frost alarm sign
" " will be displayed and flashing to indicate the frost warning.
Air Pressure and Weather Forecast ：

The main device will detect the air pressure every 1 hour and display it on the screen. At the
same time, the main device will calculate air pressure changing trend according to the current
and past detected atmospheric pressure values then shown the "TREND" on the screen.

The main device will predict the weather of the next 12 hours with the collected current and past
measurements of air pressure and the temperature in its area then show the forecasts as below.
sunny
rainy
Backlight Setting：

Backlight color: Press the "COLOR: RAINBOW" button to set the color, total 8 colors for
choosing.

Backlight brightness: Push the "BACKLIGHT：toggle switch "HI/LO" to set high(HI) or low
(LO) brightness.

When the main device uses the battery as its power source, the display backlight needs to
be lighted up by pressing the "SNOOZE/LIGHT" button, and backlight last for 15 seconds
slightly cloudy
snowy
EN8
" does not appear.
cloudy