Technoline WS 9060 Mode D'emploi page 17

Note: time zone 00 means Germany GMT+1 time zone, if the local time zone is GMT+2, select 01.
Time zone should be set correctly, or local time will be different.

Enter time zone setting, "00" will flash on the display, press "▲/WAVE" or "▼/CH" button to
choose the correct time zone from -02, -01, 00, 01 to 02, press the "T.SET" button to confirm
and convert to the next item.
Note: when selecting the 12Hr time format, the PM logo will be displayed for the afternoon time, if
not, it means the morning time.

Enter time setting, enter the setting mode, "0：00" will show on the display and the first 0 will
flash, press "▲/WAVE" or "▼/CH" button to set the hour and press "T.SET" button to confirm
and continue minute time setting. Press "▲/WAVE" or "▼/CH" button to set the minute and
press "T.SET" button to confirm and exit time setting.
Note:

In time setting mode, when the value is changed, second time will automatically start from 00
seconds.

Press and hold the "▲/WAVE" or "▼/CH button to speed up setting, so the operation can be
accelerated.

No button operation for more than 30 seconds, it will automatically save the settings and exit
the time setting mode.
Daily Alarm Setting

Press "T.SET" button to display date information or alarm time, when display alarm time, AL will
show up.

Press and hold the "AL.SET" button for more than 2 seconds, enter the alarm time setting
mode, the default alarm time is "6:30", when "6" flashes on the screen, press the "/WAVE" or
"/CH" button to set the alarm hour time, press " AL.SET "button to confirm and switch to the next
item.

Enter alarm minute time setting, when "30" flashes on the screen, press the "/WAVE" or "/CH"
button to set the alarm minutes time and press "AL.SET "button to confirm and switch to the
next item.

Enter alarm snooze time setting, the default snooze time is 5 minutes, symbol "ZZ" will be
displayed on the screen, snooze time "05" will be displayed and flashing on the screen, press
the "/WAVE" or "/CH" button to set the snooze time, after complete, press" AL.SET "button to
confirm and exit the alarm time setting.
Note: the snooze time setting range: 05 ~ 60MIN, OFF, when set to OFF, means no snooze function.
Snooze time unit is minutes.
During setup, you can press and hold the "▲/WAVE" or "▼/CH"button to speed up setting, so that
the operation can be accelerated.
No button operation for more than 30 seconds, it will automatically save the settings and exit the
time setting mode.
Alarm ON：

Switch alarm "ON/OFF" button to "ON", alarm is activated and alarm icon "
display.
Stop Alarms：

When alarming, the "
SNOOZE/LIGHT " to stop alarm ringing and the icon "
" icon will flash on the display. Press any button despite the "
EN6
" automatically stops flashing.
" shows on the