Technoline WS 9060 Mode D'emploi page 16


After the DCF signal is received successfully, the radio mast icon "
screen, while the product will automatically complete the time calibration.

At 1:00 /2:00 / 3:00 am, the clock automatically carries out the synchronization procedure with
the DCF signal to correct any deviations to the exact time. If this synchronization attempt is
unsuccessful (the radio controlled icon disappears from the display), the system will
automatically attempt synchronization again at the next full one hour. This procedure is
repeated automatically up to total 5 times.

Manual DCF signal reception, you can press and hold down the "▲/WAVE" button for two
seconds to manually receive, If no signals received within 7 minutes, then the DCF signal
search stops (the radio controlled icon disappears) and starts again at the next full one hour.

During RC reception, other button will have no operation function instead of "SNOOZE/LIGHT"
button, press and hold down the "▲/WAVE" button for two seconds to stop radio signal
searching and continue other setting.
Note:

Display backlight color will change to blue while DCF signal reception is active.

Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such
extreme circumstances, place the system close to the window.

We recommend a minimum distance of 2.5 meters to all sources of interference, such as
televisions or computer monitors

The adapter is located as far as possible from the product is larger than 0.80M, so the
receiving effect is better.

During the RC receive mode, you are unable to perform other function. If you want to carry
out other functions of operation, please press "▲/WAVE" button to exit the RC receiving
mode.
Manual time setting:

Press the "T.SET " button for more than 2 seconds, enter the setting mode, the first setting item
is temperature unit, press "▲/WAVE" or "▼/CH" button to choose temperature unit °C or °F,
press the "T.SET" button to confirm and convert to the next item.

Enter air pressure unit setting, "hPA" will flash on the display, press "▲/WAVE" or "▼/CH" to
choose air pressure unit "hPA"or"inHg", press the "T.SET" button to confirm and convert to the
next item.

Enter weather setting, weather will flash on the display, press"▲/WAVE" or "▼/CH" button to
choose your current weather, press the "T.SET" button to confirm and convert to the next item.

Enter week language setting, "GE" will flash on the display, press "▲/WAVE" or "▼/CH" button
to choose week language, total 7 languages, press the "T.SET" button to confirm and convert to
the next item.
（
Note: GE German) EN
（ ）
DA Danish

Enter year setting, "2016" will flash on the display, press "▲/WAVE" or "▼/CH" button to choose
the current year, press the "T.SET" button to confirm and convert to the next item.

Enter month setting, number beside "M" will flash on the display, press "▲/WAVE" or "▼/CH"
button to choose the correct month, press the "T.SET" button to confirm and convert to the next
item.

Enter day setting, number beside "D" will flash on the display, press "▲/WAVE" or "▼/CH"
button to choose the correct day, press the "T.SET" button to confirm and convert to the next
item.

Enter date format setting, "M" and "D" will flash on the display, press "▲/WAVE" or "▼/CH"
button to choose date format, press the "T.SET" button to confirm and convert to the next item.
（ ） （
English FR French
） （ ）
IT Italian
EN5
" will always show on the
（ ） （
SP Spain DU
）
Dutch