Publicité
Les langues disponibles
Les langues disponibles
General advice
•
The pump is suitable for the use in combination with the fountain or with small sweetwater ponds.
The solar panel delivers the required voltage for the pump and charges the internal battery where
available.
•
The LED lights switch on automatically and illuminate the fountain in darkness.
Assembly
•
Pour a few liters of clean water into the
plinth.
•
Place the pump underwater and make
sure that, it is fully immersed in water.
Use the four fl exible suction cups to stick
to the bottom of the plinth. In case the
pump tube is too far from the water sur-
face, you can raise the pump by using
stones or brick underlay.
•
Connect the pump cable and fountain light
cable to the sockets on the solar panel.
•
The solar pump is now ready to use.
7
Technical Data
Item # 10027997, 10029040
Solar Panel Power 2W
Voltage 6V DC
Water fl ow (max.) 200 l/std
Water lift (max.) 0,8m
Projection height 0,4m
Cable length 5m
Battery 3,7V, 2000mAH
Scope of delivery:
Assembly and Initial Use
1 x Solar Panel;
1 x LED ring
1 x Ground stake
1 x Base column
1 x Pump with nozzles
1 x Globe
Publicité
