hestan Aspire Serie Manuel D'installation page 23

OVERLAY PANELS
PANEL DIMENSIONS KRB 36-OV AND KRW 24-OV PANEL DIMENSIONS KRB 36-OV AND KRW 24-OV
Panels can have thickness ranging between 3/4" [18 mm] and 1-1/8" [28 mm].
Door panels can have a maximum weight 51 lbs [23 kg] and drawer panels may be a maximum
weight of 25 lbs [11 kg].
Exceeding these weights could void your warranty for any service issues which can be
attributed to overweight panels.
The hinge mechanism on Hestan refrigerators is considered to be `Zero-clearance`. The door
and drawer widths specified below assume the minimum niche width is being used and a 1/8"
[3.5 mm] reveal is desired around the panels. Adjust your panel dimensions accordingly to your
own design criteria considering your niche width and your reveal. Minimum reveal / gap should
not be less than 1/16" [1.5 mm].
Models
Door/Drawer Width A
35-1/4" [897]
KRBR/L36-OV
23-1/2" [597]
KRWR/L24-OV
Example:
84" cut-out height 36" cut-out width
4" toe kick height
1/8" gap desired all around
(CONT.)
Door Cutout Width B
N/A
12-7/8" [327]
1/8" [3]
A
Door panel: Width: 35-3/4"
Height: 54-3/4"
Determining drawer panel size:
Width: 35-3/4"
Height: 84" − 1/8" − 54-3/4" − 1/8" − 4" = 25"
If you want a 6" toe kick height with 1/8" gaps then your
bottom drawer panel height would be 23"
min 7-7/8" [200]
5-3/8"
[135]
4-1/2" [115]
B
© 2021 Hestan Commercial Corporation
EN
5-3/8"
[135]
21