Stopping The Mower - IKRA IBRM 2351 TL Manuel D'utilisation

• Stand behind the handlebars. Move the operator con-
trol lever positioned in front of the handlebars rear-
wards so that the lever is resting against the handle-
bars (fig.15).Take hold of the starter handle firmly with
the other hand.
• Pull back the starter until you feel resistance and then
pull the handle firmly and briskly to turn the engine
(fig. 14).
• Repeat the above procedure as necessary until the
engine starts.
• Move the throttle lever downward to increase the
speed (fig.11), move the throttle lever from middle po-
sition to its most downward position to decrease the
speed (fig.12)
• To turn off your mower, directly release the operator
control lever to stop the engine (fig.16).
WARNING: The cutting blade turns when the en-
gine is being started.
11
10
13 14
GB | Operating Instructions
Mowing your lawn
Start your mower (see: starting the engine). Keep hold of
the Brake (OPC) Lever (see fig.15) (releasing the Brake
(OPC) Lever will stop the engine to avoid accidents) (fig
16). To power the mower forward, move the Drive Lever
up and forward (fig.17). The Mower can be pushed with
the drive disengaged for more precise handling. After
mowing and emptying the Grass Catcher ensure the
engine it not running and turned off.
15
15
12
17

Stopping the mower

To stop the mower, release the operator control lever.
The engine and the blade will stop turning automatically.
If there is a build-up of grass beneath the chassis, stop
the engine, remove the spark plug cap and wait until the
engine has cooled before clearing the grass.
When the engine has been switched off, the cutter
continues running for several seconds therefore do
not touch the underside of the mower until the cutter
has come to a standstill!
9
16