Care And Maintenance - Klarstein BIG DADDY COOL Mode D'emploi

Masquer les pouces Voir aussi pour BIG DADDY COOL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CARE AND MAINTENANCE

Defrosting
• Frost can accumulate on the inside of the unit and defrost automatically during the
compressor cycle.
• The water is led through the outlet opening into the collecting tray above the
compressor, where it evaporates.
• Make sure that the drain hole is cleaned regularly so that the water can escape
from the storage compartment.
Cleaning the unit
• Remove all shelves and the vegetable drawer. First remove the lower door
compartment so that they can remove the vegetable compartment.
• Wipe the inside of the machine with a damp cloth and some detergent. Then wipe
with clear, warm water.
• Wash the shelves and vegetable compartment in water with detergent and dry the
parts before putting them back in the machine. Clean the outside of the unit with a
damp cloth.
• The grille of the capacitor on the back of the unit and the adjacent components can
be sucked off with a soft brush attachment.
Cleaning tips
Condensation may form on the outside of the unit. This may be due to a change in room
temperature. Wipe off the condensation water. If the problem persists, please contact a
qualified technician.
Maintenance
• Have the lamps replaced by a specialist.
• When you move the unit, hold it by the sides or on the floor. Do not hold it by the
edges of the top.
• The unit should be serviced by an authorized technician and only original spare
parts should be used. Never attempt to repair the device yourself. Repairs by
inexperienced persons can lead to injuries or serious malfunctions.
• If the unit will not be used for a long time, disconnect it from the power supply.
Remove all food and clean the unit. Leave the door open to avoid unpleasant
odours.
EN
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10034005

Table des Matières