Care And Maintenance - Klarstein LUMINANCE FROST Mode D'emploi

The indoor temperatures are influenced by the following factors:
• Ambient temperature
• Frequency of door opening
• Amount of stored foods
• Installation of the appliance

CARE AND MAINTENANCE

Defrosting
• Frost can accumulate on the inside of the unit and defrost automatically during the
compressor cycle.
• The water is led through the outlet opening into the collecting tray above the
compressor, where it evaporates.
• Make sure that the drain hole is cleaned regularly so that the water can escape
from the storage compartment.
Cleaning the unit
• Remove all shelves and the vegetable drawer. First remove the lower door
compartment so that they can remove the vegetable compartment.
• Wipe the inside of the machine with a damp cloth and some detergent. Then wipe
with clear, warm water.
• Wash the shelves and vegetable compartment in water with detergent and dry the
parts before putting them back in the machine. Clean the outside of the unit with a
damp cloth.
• The grille of the capacitor on the back of the unit and the adjacent components can
be sucked off with a soft brush attachment.
Cleaning tips
Condensation may form on the outside of the unit. This may be due to a change in room
temperature. Wipe off the condensation water. If the problem persists, please contact a
qualified technician.
EN
27