Télécharger Imprimer la page

LaserLiner PrecisionPlane-Laser 4G Pro Mode D'emploi page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

– When the rechargeable battery is being charged, the LED on the charger
lights up red. When the LED changes to green, charging is complete.
– If only one of the battery charge LEDs (10) is still illuminated, the battery
charge level is low. The device switches off automatically when the battery
charge is very low. In that case, recharge the battery.
– Disconnect the power pack from the mains when the device is not in use.
!
The battery may only be charged with the battery charger provided and
used only in this laser device. Any other use may cause injury or fire.
!
Make sure there are no conductive objects in the vicinity of the battery
contacts. Short-circuiting of these contacts can cause burn injuries or fire.
!
Do not open the rechargeable battery. This could cause short-circuits.
2
Power supply
To insert the lithium-ion
rechargeable battery
Open the battery compartment
and insert the lithium-ion battery
as illustrated.
PrecisionPlane-Laser 4G Pro
19
EN

Publicité

loading