LaserLiner PrecisionPlane-Laser 4G Pro Mode D'emploi page 17

The tilt function does not activate monitoring until 20 seconds after the
!
laser has been fully levelled (set-up phase). The tilt LED flashes every
second during the set-up phase, and flashes rapidly when tilt is active.
How the tilt function works
On
Automatic level
set-up phase
Green laser technology
Devices with PowerGreen++ technology have extremely bright
green laser diodes of the highest performance class that allow
very good visibility of laser lines at great distances, on dark
surfaces and in bright ambient lighting conditions.
Approx. 6 times brighter than a typical red laser with 630 - 660 nm
Number and direction of the lasers
H = horizontal laser
V = vertical laser
S = slope function
PrecisionPlane-Laser 4G Pro
Tilt active after 20 seconds,
rapid flashing of the tilt LED.
Enabling the tilt
function: press the
tilt button; the tilt
LED flashes every
second.
2HG360° 2VG360°
External
influence
The
laser
flashes, the tilt LED
lights up continuously
and a signal sounds.
S
17
EN