In Case Of Work In The Home; Waranty - hager TG551A 3 Guide D'installation

• If detector optional locking is not activated:
2
turn the detector anti-clockwise
to unlock it.
• If detector optional locking is activated:
A. insert a flat blade screwdriver into
the slot,
B. turn the detector anti-clockwise
to unlock it.
If the detector was part of a network, refer to 2.4. Installing a detector as part
3
of a network.
• Position the new detector on its base by turning it clockwise until it is
4
completely locked.
• Test the detector (see Testing the detector).

5.3. In case of work in the home

The detector must not be painted.
If work is to be carried out after the detector
has been installed, cover it completely.

6. Waranty

A warranty period of 24 months is offered on hager products, from date of manufacture, relating to
any material or manufacturing defect. If any product is found to be defective it must be returned via
the installer and supplier (wholesaler). The warranty is withdrawn if:
• after inspection by hager quality control dept the device is found to have been installed in a manner
which is contrary to IEE wiring regulations and accepted practice within the industry at the time of
installation.
• the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning goods.
108
B.
A.
Do not forget to remove the
protection when the work is
finished.