Installing The Detector As Part Of A Network - hager TG551A 3 Guide D'installation

2.4. Installing the detector as part
of a network
It is possible to interconnect up to 40
detectors so that all the detectors in the
home as well as the alarm system can be
triggered together.
The smoke detector can be connected
with TG550A smoke detectors and/or
TG551A heat detectors.
The responses to detection are described in chapter 1.1. How the detector works.
To connect the detectors in a network:
Put all the detectors to be networked in recognition programming mode by
1
pressing 2 times on the Cfg1 key.
The red LED flashes.
98