Publicité
Les langues disponibles
Les langues disponibles
If the parent unit is connected to more than one camera, you can select the camera to be displayed here. Use the arrow keys to select Camera and confirm
with the OK key (15). You can now select the camera (1,2,3,4, Scan) you want to display using the arrow keys, before confirming with OK.
If you have selected the Scan setting and VOX mode is on, the parent unit will scan all connected cameras for a signal. If any camera detects a noise, the
parent unit will display the image from that camera until the noise stops. When VOX mode is off, the parent unit alternately displays the image of each connected
camera for 10 seconds. If any camera detects a noise, the parent unit will display the image from that camera until the noise stops. If multiple cameras detect sounds,
a message about the other cameras appears on the screen. Press the OK key (15) to immediately switch to this camera."
You can either choose for the display to be on permanently or use the low-radiation VOX mode. To do so, select the desired mode using the arrow key naviga-
tion and confirm with the OK key (15). In VOX mode, the screen automatically turns on as soon as the camera picks up any sounds and turns it off automatically
as soon as the baby stops making any noise. For this, you can select the time delay (between 30 seconds and 3 minutes) before the screen switches off. 10
seconds before the screen switches off, a message appears on the display. The VOX mode keeps camera radiation to a minimum and reduces the display's battery
consumption. The screen remains permanently switched on during continuous operation.
You can choose whether alarm tones and key tones should be played.
Here you can set the time interval between feed alarms.
Choose a sensitivity level of between 1 and 5 for the microphone that detects your child's sounds. The higher the set value, the more sensitively the micro-
phone reacts to noise.
Select 1 of the 5 available sensitivity levels of the camera that detects your child's movement. The higher the set value, the more sensitive the camera reacts
to movements.
Choose 1 of the 5 brightness levels available.
The following three options are available in this menu item:
Language
Choose between German or English as your language.
Night vision mode
If the camera's surroundings become too dark, it automatically switches to night vision mode and transmits only in black and white. This menu item allows
you to set the brightness level at which night vision mode is activated.
Reset
If you select this menu item, all settings will be reset, but the coupling remains.
A) Signal strength:
The further away the display and camera are
positioned from each other, the weaker the sig-
nal is and the fewer bars are displayed. If the
camera is out of range, this is clearly indicated
on the screen – the noise level indicator starts
flashing and an audible alarm sounds until a
connection can be re-established. A weaker sig-
nal can cause the image to occasionally freeze.
Menu
Symbols
B)
Camera number:
Number of the camera currently displayed on
the screen.
C)
Motion alarm:
This symbol indicates that the motion alarm is
active.
D)
Zoom:
When the Zoom function is activated, this icon
appears and the image is enlarged twofold.
E)
Rotation:
When this icon is displayed, the screen is rotat-
ed 180°.
5
F)
Battery level indicator:
The status of the battery is indicated here.
When the battery level falls below 20%, the
icon will start flashing and an audible alarm will
sound. When charging, the icon will flash and
the status light (16) will light up in red until the
battery is fully charged. When this is achieved,
it changes colour and turns green.
G)
Feed alarm
When the feed alarm is switched on, the dis-
play shows a countdown to the next feed.
Publicité
