Reer Baby Cam L Mode D'emploi page 10

Camera
1. As soon as your baby becomes quiet and makes no more sound, the camera stops transmitting. It then goes into stand-by
mode until noises are detected again. This reduces the radiation exposure to a minimum.
2. If light conditions are sufficient, the camera transmits a colour image to the display. If there is insufficient light, night vision
mode is automatically activated. In this case, only a black-and-white image will be transmitted.
3. The camera can be tilted manually to find the best angle for viewing your baby.
Adding/deleting additional cameras
1. Turn on both the parent unit and the camera you wish to connect to it.
2. Briefly press the pairing button (21) on the parent unit using a thin object.
3. Add: Use the arrow keys to select Add Camera and press the OK key (15) to confirm.
Remove: Use the arrow keys to select Remove Camera and press the OK key to confirm."
4. Use the arrow keys to select the camera you want to add or remove and confirm your selection with the OK key (15).
5. Within 30 seconds, press the pairing button (6) on the back of the camera and wait for around 5 seconds. A successful coupling is then confirmed by a double beep
and a confirmation message on the screen. If the confirmation does not appear, please repeat steps 2 – 5.
6. Repeat the steps for all other cameras. Please note: If you select a save location that is already occupied, the existing data will.
Display
1. If the parent unit status light (16) starts flashing green, the built-in battery is empty. This means the display needs to be recharged.
2. Adjust the volume using the Volume Control key (14). The volume is displayed on the screen in the form of a bar chart. To mute the speaker, press and hold the
key to decrease the volume until the
3. If required, the display unit can also be placed on a flat surface (table or similar). To do this, fold out the stand on the back.
4. In normal camera mode, keys 9 – 12 have the following functions:
Motion alarm
Press the function key (9) briefly to activate the motion alarm. The
corresponding symbol appears on the screen. As soon as the camera
detects any movement, the parent unit begins transmission and an
acoustic signal is given.
Feed alarm
Pressing this function key (10) starts a countdown that displays the time
remaining until your baby's next feed. Once this countdown has expired,
an alarm will sound that can be turned off by pressing any key. The time
interval between feeds can be set in the menu under Feeds.
5. Press the Menu key (13) briefly to access the main menu. You can select the desired sub-item by navigating with the arrow keys. By pressing the OK key (15), you
confirm the selection and enter the respective submenu. Press the Menu key again to return from the submenu to the previous submenu or to the main menu.
Functional possibilities:
icon appears. To cancel muting, press and hold the key to increase the volume until it reaches the desired level.
Zoom
This function key (11) turns the 2x zoom of the image displayed on the
parent unit on or off.
Rotation
You can use this key (12) to rotate the image displayed on the parent
unit by 180°.
4