Conditions Of Use; Safety Notes; Working Range; Technical Data - Gesipa TAURUS 1 Mode D'emploi

TAURUS BA 1-4 Inhalt_prc-neu 2 04.08.11 15:45 Seite 12

1. Conditions of Use

This blind rivet setting tool may be used only
to set blind rivets, as described in the operating
instructions.
The safety instructions MUST be followed!

2. Safety Notes

= Use the tool ONLY to set blind rivets
= Never overload the tool: Work within the
stated performance parameters
= Never operate the tool without placing the
blind rivet in the hole of the workpiece
or the rivet could come off the tool! Do not
point the tool head towards yourself or
anyone else!
= The spent-mandrel container should always
be screwed tightly on to the tool whilst in
operation.
= Regularly empty the spent mandrel container:
Overloading may cause damage to the tool.

3. Working Range

Type of tool
Standard blind rivet Ø
Maximum pin diameter

4. Technical Data

Type of tool
Weight
Operating pressure
Stroke
Air connecting hose Ø
Spent mandrel container capacity
Air consumption
Setting Power at 5 bar
Hydraulic fluid Renolin Eterna 32
Noise emission L
Vibration
Compressed air requirement
Integrated spent mandrel ejection
Integrated rivet retention
12
(mm)
(mm)
(kg)
(bar)
(mm)
(mm)
(spent mandrels)
(Liter/rivet)
(N)
(ml)
(dB)
pa
(m/s
(filtered)
= Do not use the tool as a hammer.
= Regularly check the compressed air connec-
tions for 'play' and leakage.
= Prior to maintenance and when not in use,
always disconnect the tool from the com-
pressed air supply.
= Safety glasses should always be worn when
using the riveting tool. The use of any per-
sonal protective clothing is always recom-
mended.
= Do not exceed the air pressure limit of the
tool.
= When not in use, make sure that the tool
cannot fall to the floor.
= Repairs should be carried out only by quali-
fied staff. When in doubt, the tool should be
sent back (not dismantled) to the supplier or
to Gesipa.
TAURUS 1 TAURUS 2
2,4 – 3,2
up to 4 Alu up to 6 Alu
2,5
TAURUS 1 TAURUS 2
1,3
5-7
15
6
approx. 100 to 200 acc. to size
approx.1,0 approx.2,3
4.200
approx.30 approx.30
77
) < 2,5
2
TAURUS 3 TAURUS 4
up to 5 up to 6,4 up to 6,4
all materials
up to 8 Alu up to 8 Alu
4,5
3,2
TAURUS 3 TAURUS 4
1,6 1,9
5-7 5-7
18 25
6 6
approx.4,8 approx.4,8
9.000 14.000
approx.30 approx.30
78 79
< 2,5 < 2,5
4,5
2,0
5-7
19
6
20.000
79
< 2,5