Kodak ADVANTIX C300 Auto Mode D'emploi page 13

2. Insert the film
cassette
completely into
the
FILM
(16).
CHAMBER
• Make sure the
Film Status
Indicator (FSI) on the film
cassette is at
for a new cassette.
• Do not force the film
cassette into the film
chamber.
(#1 position)
3. Close the film door to start the
auto-film advance. The
(20) on the
COUNTER
(13) will display "1."
PANEL
• After you close the safety-
interlocked film door, you
cannot open the door until
the film is completely
rewound into the film
cassette.
FRAME
LCD
7