Kodak ADVANTIX T40 Auto Mode D'emploi page 15

2. Insert the film cassette completely
into the film chamber (18).
• Make sure the Film Status
Indicator (FSI) on the film
cassette is at
for a new cassette.
• Do not force the film cassette
into the film chamber.
(#1 position)
3. Close the film door to start the
automatic film prewind.
• The picture counter (20) in the
LCD panel (4) displays the
number of pictures remaining
on the film.
• After you close the safety-
interlocked film door and the
film starts to prewind, you
cannot open the door until the
film is completely rewound
into the film cassette.
13