Enable The Illuminator Kit - Axis T99A10 Mode D'emploi

AXIS T99A10 Positioning Unit 24 V AC/DC
1
Connector from the illuminator (x2)
2
Connector from the positioning unit (x2)
6. Connect the cables. See Connectors on page 43.
7. Attach the illuminator bracket to the positioning unit using the four screws (T20, torque
3.0 Nm).
Note
For more information on operating the illuminators, see the illuminator LED manual
(check model on product label) and the User Manual of your compatible Axis product at
www.axis.com

Enable the illuminator kit

Note
This is only applicable if you have installed the illuminator kit.
40