Midea MRQ22D7AST Guide De L'utilisateur page 21

INSTALL WATER FILTER
4. Remove the water filter from its packaging, and then remove the clear,
plastic cap from the filter head.
5. Align the tabs on the filter head with the notches in the opening, and
then insert the water filter into the opening. Press inward, while turning
the filter clockwise to install.
The housing allows the filter to move slightly upward and
NOTE:
downward.
Turn on the water supply to refrigerator .
6.
7. Close the filter cover.
REPLACE WATER FILTER
The Water Filter icon on the control panel will illuminate after 150+ days to
indicate that it is time to order a replacement water filter. After 180+ days
the icon will illuminate and flash to indicate it is time to replace the water
filter.
1.
Turn the water filter counterclockwise, and then pull out to remove.
2.
Install a new water filter following steps 4 to 7 in the previous section.
3.
Press and hold the Water Filter control for 3 seconds to clear and reset
4.
the filter status clock.
NOTE: The light will turn o and 3 beeps will sound.
Water filter
.
21