Tripp-Lite U442-DOCK3-B Manuel De L'utilisateur page 6

Installation
Notes:
• Only one monitor can be connected at a time.
• Only one memory card slot can be used at a time.
• When connected to power through USB-C charging port,
• See Optional Accessories section for suggested cables.
• When the unit is connected to the USB-C port on your
17-11-242-9337B5.indb 6
15W of power is dedicated to the docking station and
connected USB peripherals. The rest is used to charge the
connected device.
computer and to a network via Cat5e/6 cabling, a
network connection will be automatically established. If
no connection is made, you can manually establish one
by going to your computer's network settings page. For
example, on a Mac you would navigate to the Network
section found in System Preferences, click the "Assist Me"
button to get to the Network Setup Assistant and follow the
prompts to establish a connection.
6
1/29/2018 4:30:40 PM