Quick start guide, Frequency converter FU
for Schmalz Blower SB-V and SB-V1 / SGBL-FU
30.30.01.00055
Output frequency
Output voltage, External ventilator supply
Fuse, external ventilator supply (optional)
Maximum switch-on frequency per hour
Digital inputs
Signal level, high status
Signal level, low status
Analogue inputs, Transduction accuracy
Analogue outputs
maximum ampacity as current output
maximum apparent ohmic resistance
as current output
24 V DC fixed voltage output
maximum ampacity
10 V DC fixed voltage output
maximum ampacity
Potential-free contacts, max. load
Ventilation
Ambient temperature during operation
Storage temperature
Maximum humidity
Maximum installation altitude
Weight
Type of protection
Maximum cross-section power supply
Maximum cross-section pilot wires
Maximum connection cross-section
external ventilator
Terminal range, power cable:
Terminal range, pilot wires:
Certifications
European EMC guidelines
If the FU frequency converter is installed and operated according to the recommendations
of these operating instructions, it fulfils all requirements of the EMC regulations according to
the EMC product standards for motor driven systems EN 61800-3.
UR certification
(Use in North America)
The FU frequency converter is equipped with a motor temperature monitoring (PTC). .
Seite / Page 18/24
"Suitable for use on a circuit capable of delivering not more than 5000 rms sym-
metrical amperes, 380...480Volts (three phase)" and "when protected by J class
fuses." as indicated."
J. Schmalz GmbH
Aacher Straße 29
D - 72293 Glatten
Tel +49 +7443 / 2403 - 0
Fax +49 +7443 / 2403 - 259
Status 01.2014
http://www.schmalz.com
Index 01
e-mail: schmalz@schmalz.de
FU
[Hz]
0 – 400
[V]
3 AC mains voltage
surge-proof 500 mA (T)
12
12 V – 30 V
0 V – 5 V
10 bit
10 mA
1 kOhm
70 mA
30 mA
230 V/2 A
air cooled by motor ventilator
°C
0 – 50
°C
-20 ... 70
90% without condensation
Up to 1000 m above sea level without
loss of performance
[kg]
5.6
IP 55
mm
2.5
2
mm
1.5
2
mm
2,5
2
mm
7.0 ... 13, width across flats 25
mm
4.5 ... 9.0, width across flats 20