Publicité
Les langues disponibles
Les langues disponibles
vised. A short term cooking process
has to be supervised continuously.
- Unattended cooking on a hob with fat
or oil can be dangerous and may re-
sult in a fire.
- Fire hazard: do not store elements on
cooking surfaces.
- Only counter top protectors designed
for use with the cooking appliance
and listed in the manufacturer's ins-
tructions should be used as suitable
protection for the counter top incorpo-
rated in the appliance. Use of unsui-
table protectors may cause accidents.
- WARNING: Accessible parts will beco-
me hot when in use. To avoid burns
and scalds children should be kept
away.
Insert in the fixed wiring a mean for
disconnection from the supply mains
having a contact separation in all poles
that provide full disconnection under
overvoltage category III conditions, in
accordance with the wiring rules. The
plug or omnipolar switch must be easily
reached on the installed equipment.
This appliance is not intended to be
used via an external timer or a remote
control system.
The manufacturers decline any respon-
sibility in the event of non-compliance
with what is described above and the
accident prevention norms not being
respected and followed.
To avoid all risk, if the power cable be-
comes damaged, it must only be repla-
ced by the manufacturer, by an autho-
rised service centre, or by a qualified
electrician.
User's Instructions
Installation
All operations relative to installation (electric connection)
should be carried out by skilled personnel in conformity with
the rules in force.
As for the specific instructions see part pertaining to ins-
taller.
Use
TOUCH CONTROL HEATING ELEMENTS
Touch sensitive keys
All operations can be performed using touch sensitive keys
(capacitive sensors) located on the front of the control
board; each key has a corresponding display. All actions are
confirmed by an audible signal.
TOUCH CONTROL (Fig. 2)
1 ON / OFF
2 Minus -
3 Plus +
4 Double / Triple Circuit
5 Cooking zone
6 Setting level display
7 Dual circuit pilot light
8 Illuminated Segment Multiple Circuits
Switching the Touch Control on/off
After mains voltage is applied, the touch control initialises
for approximately one second before it is ready for use.
All displays and LEDs flash for approximately one second
after resetting. Once this period is complete, all displays and
LEDs switch off and the touch control is in standby mode.
Press the ON/OFF (1) button to switch the touch control on.
The cooking zone displays indicate "0". If a cooking zone is
in "hot" (high temperature) mode, the display will alterna-
tely indicate "H" and "0".
After switching the touch control on, it will remain active for
20 seconds. If no cooking zone is selected, the touch control
automatically switches back to standby mode.
The touch control can only be switched on by pressing the
ON/OFF (1) button.
Pressing the ON/OFF (1) button at the same time as other
buttons will have no effect and the touch control will remain
on standby.
The touch control can be switched off at any time using the
ON/OFF (1) button. This is even the case when the control
has been locked by the child safety feature.
The ON/OFF (1) button always takes priority in the switching
off function.
Publicité
