Tectro TBH 460 Manuel D'utilisation page 108

1 4
108
man_TBH460 ('11).indd 108
The fire has a weak The stove has obstruc-
and orange flame, tions internally
pellet do not burn Fumes extractor is
correctly and/or the damaged
glass turns black (too)
quickly
Room air recirculation Flue gas temperature
fan keeps working sensor is broken.
when the stove is cold
Electronic circuit board
is broken
Ash on the floor Broken, worn out or
around the stove damaged door seal
Smoke/flue pipes are
not air tight
Stove switches off. Electrical plug (acci-
Alarm displayed is dentally) unplugged
"AlAr no rEtE" Temporary power
failure
Faulty electronic circuit
board
Stove is in steady The by end user re-
condition, the display quired room tempera-
shows: "RiS" ture is reached
Certain fume outlet
temperature threshold
is reached
Stove switches off. The fire door is not
Alarm displayed is closed
"AlAr dEp"
The exhaust/flue gas
pipe/chimney is bloc-
ked
Stove needs maintenance. By authori-
zed Tectro technician only
Wood pellets can burn thanks to the
chimney flue having natural draught.
Have fan replaced immediately (cod.
Com0259) as it can be bad for your
health. By authorized Tectro techni-
cian only
Replace temperature sensor, code
Com0239. By authorized Tectro tech-
nician only
Replace the circuit board, code
COM0231. By authorized Tectro tech-
nician only
Replace the seal. Code COM0244. By
authorized Tectro technician only
By authorized chimney installer only:
Fumes pipes that are not airtight can
be dangerous for you health. Seal the
pipe fitting immediately (with high
temperature silicone) and/or replace
the pipes with correct ones.
Verify the electrical plug is plugged in
Verify the power failure and restart
the stove
Replace the electronic circuit board,
code COM0231. By authorized Tectro
technician only
This is not an error. The stove works at
minimum rate: no problem
This is not an error. The stove works at
minimum rate: no problem
Close the fire door and check the door
seals are in good condition. If needed
have the fire door seal replaced by
Tectro authorized technician code
COM0244.
Have exhaust/flue gas pipe / chim-
ney cleaned by authorized chimney
sweeper immediately. Call authorized
chimney sweeper.
07-10-11 09:06