Publicité
Les langues disponibles
Les langues disponibles
2610048761.qxp_HDC100, 200, 250, 300, 400 10/25/17 1:47 PM Page 5
HDC100
FIG. A1
CORE BIT
ADAPTOR
HDC100
before
making
adjustments or changing accessories.
Such preventive safety measures reduce the
risk of starting the tool accidentally.
FIG. A2
Functional Description and Specifications
To reduce the risk of injury user must read instruction manual for the use of
the tool with this attachment.
SAVE THESE INSTRUCTIONS
HDC100 Dust Extraction Attachment
FRICTION
DUST SEAL
DUST
CAP
DEPTH ST
OP
BUTTON
Disconnect the plug
from the power source
any
assembly,
AUXILIARY
HANDLE
RING
HOUSING
CLAMP
TELESCOPIC
LEVER
GUIDE
Assembly
REMOVING AND INSTALLING DUST
EXTRACTION SYSTEM
First remove the auxiliary handle that comes
standard with the tool. To remove, loosen the
hand grip and remove the handle from the tool
(Fig. A2).
To install the dust extraction attachment, slide
the clamping band of the auxiliary handle over
the chuck until the band rests on the barrel of
the tool. Then securely tighten the hand grip
(Fig. A3).
FIG. A3
-5-
HOUSING
DUST
PORT
Publicité
