Bosch HDC100 Consignes De Sécurité/D'utilisation page 15

2610048761.qxp_HDC100, 200, 250, 300, 400 10/25/17 1:47 PM Page 15
HDC300
Insert the dust extractor hose from the dust
extractor into the dust port of the dust
extraction unit (Fig. C10).
The Bosch dust extractor hose comes with a
sleeve nozzle attached to a snap-in
connector (Fig. C10). The sleeve nozzle
provides the quickest, easiest connection of
the nozzle to the attachment. The snap-in
connector provides a more secured
connection.
To use the snap-in connector, remove the
rubber nozzle from the dust extractor hose.
FIG. C10
Operating instructions
Press the snap-in connector into the dust
port until you hear the click.
Dust port adaptors are also available to
connect
attachment to any common size dust
extractor hose. See Boschtools.com for
details.
Turn the dust extractor on and place the
tool / attachment over the desired chiseling
location. Follow all tool safety and operating
instructions.
DUST
PORT
SLEEVE
NOZZLE
-15-
the Bosch dust extraction
SNAP-IN
CONNECTOR
DUST
EXTRACTOR