Bosch HDC100 Consignes De Sécurité/D'utilisation page 12

2610048761.qxp_HDC100, 200, 250, 300, 400 10/25/17 1:47 PM Page 12
HDC300
FIG. C1
CHISEL
(NOT INCLUDED)
HDC300
before making
adjustments or changing accessories.
Such preventive safety measures reduce the
risk of starting the tool accidentally.
The HDC300 dust extraction attachment
comes ready to install on any Bosch 12-15 lb
hammer.
FIG. C2
DH712VC
DH1020VC
11245EVS
RH1255VC RH850VC
Functional Description and Specifications
To reduce the risk of injury user must read instruction manual for the use of
the tool with this attachment.
SAVE THESE INSTRUCTIONS
RUBBER
BUMPER
EXTENSION
TUBE
Disconnect the plug
from the power source
any assembly,
RH540M
RH540S
11264EVS
11265EVS
DH507
RH745 11321EVS
11316EVS*
HOUSING
EXTENSION
ARM
DUST
PORT
Assembly
To use the HDC300 with compatible Bosch
hammers, the attachment comes with a total
of 3 hammer adaptors. Use the appropriate
size adaptor for the appropriate size hammer
(Fig. C2).
To change the hammer adaptor, remove the
adaptor from the metal extension arm by
using a flat edge screwdriver and wedging it
between the metal arm and the adaptor.
FIG. C3
EXTENSION
ARM
-12-
HAMMER
ADAPTOR
CLAMPING
BAND
HAMMER
ADAPTOR