Mounting Of The Bikes On The Bike Carrier - Pro-User SAFFIER IVqc Notice D'assemblage Et De Sécurité

MOUNTING OF THE BIKES ON THE BIKE CARRIER

The first bike must be placed in the rear wheel holders (the ones closest to the
car) and fastened to the U-frame with the frame holder.
Adjust the wheel holders by pushing them in
or pulling them out in such a way that the
bike's wheels are inserted in these holders as
symmetrically as possible and as far as
possible. Attention: Do not pull out the wheel
holders beyond the red mark! Use the straps
to tightly secure the wheels to the wheel
holders.
Secure the bike frame to the U-frame using
the frame holder. Since the frame holders do
not have to be used in a fixed point, you can
try out several positions. It is important to
place the frame holders as high as possible.
Use the straps to secure the bikes. With
these straps, any bike can be secured easily
without placing a load on the bike crank!
Place every next bike in opposite directions into the other wheel
holders and proceed as described above for the first bike. Attach
the fourth bike with the extra frame holder (see picture) to the
frame of the third bike.
Now secure the bikes using the long safety belt. Run the safety belt
through the bike frame and around the U frame and tighten firmly.
38