Mounting Of The Bikes On The Bike Carrier - Pro-User BRILJANT Notice D'assemblage Et De Sécurité

MOUNTING OF THE BIKES ON THE BIKE CARRIER

NOTE: The number plate and lights can only be mounted after having mounted
the bikes.
The bikes are well protected by several foam rubber accessories. It is possible to
move these foam rubber accessories, to provide optimum protection for your
bike.
1) The frame is protected by the foam rubber on the arms
2) The "legs" of the carrier have two foam rubber rolls that protect the bike
frame on the side
3) Two rectangular foam rubber accessories can be placed in between the bikes
(hanging on the arms).
Mounting of the bikes on the bike carrier: In principal, the frames of the bike are
hanging on the horizontal arms.
Remove all parts from the bikes that could easily be lost (E-
bike batteries, bike pumps, speedometers, baskets, panniers,
bicycle seats etc.) during transport. These parts may become
loose by the increased air resistance and vibration and put
other road users at risk.
1
The first (and heaviest, max 20kg) bike has
to be placed in the rear foam holders (the
one which are the nearest to the car) and
must be secured with the integrated,
flexible rubber strap.
Next, the front wheel must be fastened with
the supplied straps of ~65cm. This to
protect the wheel from moving/turning.
36
2 3