Mounting The Bike Carrier - Pro-User SAFFIER IVqc Notice D'assemblage Et De Sécurité

MOUNTING THE BIKE CARRIER

The bikecarrier comes unassembled. Remove all parts from packaging and
arrange them in a well-organized way. The instructions will clearly describe and
show the parts that you need for each step and how to assemble the bikecarrier.
Step 1
Parts:
Mounting:
Slide the U-frame against the outside of the U-frame holders
of the base frame. Secure this U-frame with the supplied
carriage bolts (M8x60), washers and plastic rotary knobs.
Make sure the plastic rotary knobs are on the inside (see
picture).
Please note you have to firmly tighten both rotary knobs so
that the U-frame will come on its place well.
End result:
32