Pro-User SAFFIER IVqc Notice D'assemblage Et De Sécurité page 33

Step 2
Parts:
Mounting:
Slide the two rear light holders (incl. lights) into the light holder rail (the square
tube at the front of the base frame). Make sure the
light marked with an "R" is mounted on the right
side (the fog light should be placed on the left
side). Screw both holders on with the two hex head
screws (M6), washers on both sides and the self-
locking nut (M6) and attach the screw downwards.
To make sure the lights are securely fastened, you
should tighten the plastic star knobs, which are
located at the back of the light holder rail.
End result:
Slide the eight wheel holders into the openings in
the base frame. Make sure to slide the wheel
holders into the frame with the ends pointing
downwards (see picture). Fasten the wheel holders
using the plastic star knobs. When adjusting the
wheel holders, they may not be pulled out beyond
the red marking!
Marking Plastic star knob
Plastic star knob
33
carriage bolt