Emptying
a – Container
The container underneath the cyclone should be emptied when about 2/3 full.
c – Plastic bag
You must clean the filters before replacing the plastic bag. It should be replaced when
the dust level is about 5 cm below the discharge flap.
Clean the filter and use the dust extractor.
L – Longopac
Close the bag using the supplied cable ties when you believe that it has been filled to
a suitable level. Another cable tie is used a little further up. This forms the bottom of
the next bag. The filled bag is then cut off, and the machine is ready to be used again.
Changing the bag magazine
30
DC 3900, Art.nr. 94171-E