Oase OxyMax 100 Notice D'emploi Et Garantie page 13

Connect the unit

Keep the air hose as short as possible and lay
it well protected.

Connect the aeration stone to the air hose
and position the aeration stone in the pond.

Attach the free end of the air hose to the air
outlet on the unit.
COMMISSIONING/START‐UP
N O T E
Never operate an air connection by itself,
i. e. without the tube and aerator con‐
nected.
Switching on: Connect the unit to the mains. The
unit switches on as soon as the power connec‐
tion is established.
Switching off: Disconnect the unit from the
mains.
Adjusting the air quantity and bubble pattern
 C
Air quantity: Adjust the air quantity by turning
the air connection control knob.
Bubble pattern: Take the aerator out of the wa‐
ter and adjust the bubble pattern at the aerator
using a coin. Adhere to the safety instructions!
WEAR PARTS
The following components are wear parts and
are excluded from the warranty:

Aerator, filter felt discs, membrane
‐ EN ‐
13