Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- If the dirt does not come off use a soft cloth moistened with
soapy water.
Never use solvents such as petrol, alcohol, ammonia
water, etc. These solvents may damage the plastic
parts.
5.2 Repair service
Our after-sales service responds to your questions conceming
maintenance and repair ofyour product as well as spare parts.
Exploded views and information on spare parts can also be
found under: info@grupostayer.com
Our customer consultants answer your questions conceming
best buy, application and adjustment of productsand accessories.
5.3 Warranty
Warranty card
lncluded in the documentation that accompanies this equipment,
you should find the warranty card. You should fill out the card
completely and retum to vendar with a copy of purchasing
receipt or invoice and you should receive a receipt.
Note: lf you cannot find the warranty card within the
documentation,youmust ask for it through your supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or repaired
otherthan themanufacturer.
5.4 Disposal and recycling
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
OnlyforEC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for
Waste Electrical and Electronic Equipment and its
implementation into national right,power tools that are
no longer usable must be collected separately and
disposed of in an environmentally correct manner.
Subject to change wlthout notlce.
6.Regulations
6.1 Technical Data
= Rated power input
= Load speed
= Disc Diameter
= Maximum cutting depth
= Weight
L
=Sound power level
WA
english
16
L
=Sound pressurelevel
PA
=Vibration
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V- 60Hz. For lower voltage and models
for specific countries, these values can vary.Please observe
the article number on the type plata of your machine.The
tradenamesoftheindividualmachines may vary.
NoiseNibration lnformation
Measuredsoundvalues determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 98 dB(A); Sound power level 112 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN 60745:
Sawing chipboard table: a
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. lt
may be used for a preliminaryassessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications,with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure leveloverthe totalworking period.
An estimation of the levelof exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce theexposure leveloverthetotal working period.
ldentify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
accessories,keepthe hands warm,organisationof work pattems.
6.2 EU declaration of conformity
The undersigned:
STAYER IBERICA,S.A.
With address at:
Calle Sierra de Cazarla, 7
Área EmpresarialAndalucra - Sector 1
28320 PINTO (MADRID)
Tel.:+34 91 691 85 16 / Fax:+34 91 691 91 72
CERTIFIES
That the machine:
Type:
Models:
We declare under our sole responsibllity that this product is
in confonnity with the following standards or standardized
documents: EN 60745-1, 60745-2-5, 55014-1,55014-2, 61000-
3-2, 61000-3-3 according to EU regulations 2006/42/CE y
2004/108/CE.
Ramiro de la Fuente
Managing Director
16
=2.8m/s
, K=1.5 m/s
.
2
2
h
DOUBLE CUT SAW
DS 125
November 6, 2013
Publicité
Chapitres
Table des Matières
