Renson Cube TouchDisplay Manuel D'instruction Pour L'utilisateur page 135

➊
➋
➌
• Press to confirm. You'll go back to the INSTALLER MENU. When the screen is left by
n
simultaneously pressing
Remark:
If multiple TouchDisplays are connected with the same ventilator unit the CO
threshold needs to be configured for the main control (kitchen/living room). The CO
threshold needs to be deactivated on the secondary control(s).
• Access the INSTALLER MENU (see explanation in section 8) and
select CO THRESHOLD and shortly press
2
• The threshold value for the CO
You can set a value between 450 ppm and 2000 ppm by using
▲ and ▼ .
• When you go beyond 2000 ppm, the screen will indicate that the
CO function is cancelled (applicable to secondary controls).
2
▲ AND ▼ , any made changes are not saved.
n .
concentration lights up.
2
2
2
EN
135