Linking The Touchdisplay With The Ventilator Unit; Main Or Secondary Control Setting; Programming The Control Setting (Main Or Secondary) - Renson Cube TouchDisplay Manuel D'instruction Pour L'utilisateur

8.1 • Linking the TouchDisplay with the ventilator unit
In case this has not been done yet, the TouchDisplay needs to be linked with the ventilator unit.
In order to do so, follow the steps mentioned in section 6: 'linking the TouchDisplay with the
ventilator unit'.
8.2 • Main or secondary control setting
Depending on the function of the TouchDisplay it can be configured as a main or secondary
control and/or repeater.
8.2.1 • Programming the control setting (main or secondary)
The secondary control(s) need to be programmed as 'secondary control'.
➊
• Select the INSTALLER MENU – DEVICE SETTINGS on the
second- dary control and press n .
EN
131