Application With 2 Or More Touchdisplays - Renson Cube TouchDisplay Manuel D'instruction Pour L'utilisateur

8 • Application with 2 or more TouchDisplays
The ventilator unit can be controlled with multiple TouchDisplay controls.
The main control is put in the kitchen or living room, depending on the lay-out (see section 5.
"installation and connec tion"). Other control(s) -called secondary control(s) -can be placed
anywhere.
You first have to program some additional settings when you decide to operate the ventilator
unit with multiple TouchDisplay controls;
– The secondary control(s) need to be linked to the ventilator unit first.
– The secondary control(s) needs to be programmed as a secondary control or if necessary,
as a repeater.
– The CO threshold of the secondary control(s) needs to be deactivated.
2
Implement the steps in the correct order as described further on in this section.
Use the INSTALLER MENU of the TouchDisplay for this.
Access the INSTALLER MENU as follows:
SETTINGS
Program
Clock
EN
130
• Access the USER MENU from the main control menu by briefly
pressing both ▲
MENU by pressing both
• You can choose between different Installer menu's by pressing
▲ or ▼ .
• Press n to select a certain configuration menu.
• You can exit the INSTALLER MENU by shortly pressing both
▲ AND ▼ .
AND ▼ . You can now access the INSTALLER
▲ AND ▼ for three seconds.