Display Setting - Renson Cube TouchDisplay Manuel D'instruction Pour L'utilisateur

7.3.3 • Display setting
➊
➋
➌
• The settings for the display itself can be accessed via USER
MENU – DISPLAY.
• Select USER MENU – DISPLAY and shortly press
• Active time now lights up.
This is the time after which the display goes into stand-
by. Default this is set at 5 minutes. The RENSON
portrayed in stand-by mode. Press
lapse.
You can enter a value using
Press n to save the selec ted time lapse. The display will never
enter the stand-by mode when Active Time is set to 0:00:00.
You can return to the previous
menu by simultaneously pressing
▲ ▼
AND . Any made modifica-
tions will not be saved.
n to change this time
▲ or ▼ .
!
.
n
logo is
®
EN
127