Urmet Mikra2 1784/1 Notice D'installation Et Utilisateur page 17

the column to which it belongs. Users can identify the source of the call by the ring tone.
Secondary station address (dip-switch 2): Two secondary calling stations may be present in a column and
must have a different address.
Door opener (dip-switch 3): The electric lock can be managed in "privacy" or "free" mode. The door unit
works as follows in the two cases:
• "Privacy": the electric lock may only be activated by pressing the door opening button on the calling
station when an audio conversation has been established or when after having received a call or auto-on
function either a video connection has been established.
• "Free": when pressing the door lock release button of an apartment station, the door unit electric lock
can be activated only if the door unit is confi gured as main or the user belongs to the column of the same
secondary door unit. This column is defi ned by the ID setting of the secondary door unit. This function is
typically used for secondary stations.
Interruption (dip-switch 4): where is in progress an auto-on or an intercom conversation the respective
column or the whole system is in busy mode, which, according to the confi guration of this switch, can be
interrupted or not by a call from the door unit.
The parameter "interruption" must be programmed in the same way for all system call stations.
Camera lights (dip-switch 5): the camera lights may be turned off if illumination in the surrounding
environment is suffi cient at night.
Number of users (DIP switch 6): one-family (1 key) for Ref. 1784/1 panel, two-family (2 buttons) for
Ref. 1784/2 panel.
The "Number of users" parameter must never be changed.
3.3.2 SW3 settings
ON
1 2 3
ID=0
ON
1 2 3
ID=8
ON
1 2 3
ID=16
ON
1 2 3
ID=24
Set a number from 0 to 3 if the door unit is a main unit (v. AUX dip 1) or from 0 to 31 if the door unit is a
secondary unit as shown in the previous fi gure.
• There must not be two main stations with the same ID. Two secondary stations may coexist with the
same ID but with different address (See SW4 dip-switch 2).
• The ID of the secondary door unit must coincide with the column ID set in the column interface 1083/50,
if present.
DS1784-001
DIP ON DIP ON DIP
4 5 1 2 3 4 5 1 2 3 4
ID=1 ID=2
DIP ON DIP ON DIP
4 5 1 2 3 4 5 1 2 3 4
ID=9 ID=10
DIP ON DIP ON DIP
4 5 1 2 3 4 5 1 2 3 4
ID=17 ID=18
DIP ON DIP ON DIP
4 5 1 2 3 4 5 1 2 3 4
ID=25 ID=26
ID
ON DIP ON DIP
5 1 2 3 4 5 1 2 3 4 5
ID=3 ID=4
ON DIP ON DIP
5 1 2 3 4 5 1 2 3 4 5
ID=11 ID=12
ON DIP ON DIP
5 1 2 3 4 5 1 2 3 4 5
ID=19 ID=20
ON DIP ON DIP
5 1 2 3 4 5 1 2 3 4 5
ID=27 ID=28
ON DIP ON DIP ON
1 2 3 4 5 1 2 3 4 5 1
ID=5 ID=6
ON DIP ON DIP ON
1 2 3 4 5 1 2 3 4 5 1
ID=13 ID=14 ID=15
ON DIP ON DIP ON
1 2 3 4 5 1 2 3 4 5 1
ID=21 ID=22 ID=23
ON DIP ON DIP ON
1 2 3 4 5 1 2 3 4 5 1
ID=29 ID=30 ID=31
DIP
2 3 4 5
ID=7
DIP
2 3 4 5
DIP
2 3 4 5
DIP
2 3 4 5
17