Publicité
Les langues disponibles
Les langues disponibles
TECHNICAL SPECIFICATIONS:
- Temperature range
- Humidity
- Supply voltage
- Frequency
- Maximum consumption of card (excluding motors, lamps and external actuators)
- Transient mains power drops
- Maximum power at motor output shaft
- Max. load at flasher output
- Available current at photocell power output
- Radio receiver connector with power supply
- Electrical protection
- Weight of equipment
- Dimensions
- Volume
- All inputs must be used as clean contacts because the power supply is generated on the card and is arranged so as to ensure double or reinforced insulation with
respect to live parts.
- All inputs (function - safety) are controlled by a programmable integrated circuit (PAL).
Common of the contacts (n.o. and n.c.)
8
Photo cells (n.c.)
10
Safety devices during closing (n.c.)
B
Safety devices during opening (n.c.)
E
Closing push button (n.o.)
11
Opening push button (n.o.)
9
N.C. contact for motor 2 limitswitch.
FM2
N.C. contact for motor 1 limitswitch.
FM1
Single pulse push button (n.o.)
K
Stop push button (n.c.)
2
from 0 to 70°C
< 95% without condensation
230V~ ± 10%
50/60 Hz
70 mA
20 mS
1 Hp
40W 250V cos = 1
0.8A 24Vac ±15%
0.8A 24Vac ±15%
IP 54
3 Kg
20.5x24x10.5 cm
5166 cm
3
GREEN LED IS NOT ILLUMINATED
RED LED IS ILLUMINATED
Publicité
