Reloop Spin! Mode D'emploi page 80

2. Out ports
Here you can determine the number of outputs. A "2" should be entered here.
3. Setup
Here you can adjust the single outputs for the left and right side. Furthermore
you can adjust the buffer size via the button "Control Panel" in the ASIO setup.
NOTE!
All audio device settings have been automatically adjusted in the easy
setup; this way you do not have to carry out any changes here.
4.1.4 Timecode
In this detailed timecode menu several adjustments for player 1 and player 2 can
be carried out although they are not necessary if the easy setup was successful.
You should carry out advanced settings for optimazation and solving problems
only.
The default settings are:
Player 1: 0: Reloop Spin!-Interface 1
Player 2: 2: Reloop Spin!-Interface 3 – Reloop Spin!-Interface 4
80
1
2
3
4
5
6
7
8
9
10
11
12
13
15
1. Timecode from
Here you can set the timecode source, vinyl or CD.
2. Spin! mode
Here you can select the Spin! mode (see chapter 2, item 31).
3. Audio device
Here the ASIO driver should be selected.
4. Audio source
Here you can assign the corresponding connections of your Spin! interface.
18 17 14
– Reloop Spin!-Interface 2
16