Reloop Spin! Mode D'emploi page 79

4. Auto gain
If this function is activated the gain values of tracks with a different volume level
will be matched. This way a manual matching via the gain knob -29- is no longer
necessary.
5. BPM match
Activates the auto match function when loading new tracks.
NOTE!
Via the beat match button -46- you can also match each side with the other.
6. Auto cue
Via this you can turn the auto cue function on/off.
7. First cue point search
Via this you can determine the time frame in seconds for the first cue point
search.
8. dB sensitivity
Here you can adjust the sensitivity in decibel and corresponding threshold level
that should be used for setting a cue point.
9. Fading time
Here you can adjust the crossfading time for the auto mix function of the Spin!
list.
10. End of track warning
Here you can adjust the optical end of track warning-time in seconds.
4.1.3 Audio devices
1
2
3
1. Output device
Here you select the Reloop Spin! interface and it should be displayed here.
79