Remote Control - Yamaha HTR-5450 Mode D'emploi

CONTROLS AND FUNCTIONS

Remote Control

This section describes basic operation of this unit with the
remote control. First, press AMP(TUNER) on the
component selector. Refer to "PRESET REMOTE
CONTROL" for full details.
1
2
3
4
5
6
7
8
9
0
1
Indicator
This flashes in red when pressing a button on the remote
control. If it flashes rapidly several times, press the selected
button again.
2
Component selector buttons
Press one of these buttons which corresponds to the
component you want to control with the remote control.
(The proper code must be set for your component. Refer to
"Setting the Manufacturer Code".) When the component
selector button has been pressed, the remote control is set to
that component operation mode.
6
3
Each time you press this button, the unit switches between
the power on and standby mode.
4
Press this button to output the test tone for each speaker.
5
Press These buttons are used to select a preset station.
AMP(TUNER).
A/B/C/D/E:
PRESET –/+: To select a preset station number (1 to 8)
6
Press this button to mute the sound. To cancel mute, press
this button again.
q
7
These buttons are used to adjust the volume level.
w
u: To turn up the volume
d: To turn down the volume
e
8
Press this button to set the SLEEP timer.
9
These buttons adjust the settings of the SET MENU and
TV VOLUME
TIME/LEVEL mode.
0
Press this button to select the items in the TIME/LEVEL
mode.
TV INPUT
q
These buttons select the input source.
r
CD:
TUNER:
t
MD/CD-R:
DVD:
D-TV/CBL:
VCR:
AUX:
V-AUX:
w
Press this button to play a source connected to the 6CH
INPUT jacks.
POWER
TEST
A/B/C/D/E, PRESET –/+
To select one of a group (A to E) of preset
stations
MUTE
VOLUME
SLEEP
–/+
TIME/LEVEL
Input selector buttons
To play a CD
To listen to an FM or AM broadcast
To play an MD or CD recorder (or tape
deck)
To play a DVD
To watch a TV/digital TV or cable TV
To play a video cassette
To use another audio component
To use another audio/video component
6CH INPUT