Active Smart™ Operating Instructions - Fisher & Paykel Active Smart E522B Instructions D'installation Et Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For information on the operation of the Ice & Water control panel please refer to the
Ice & Water User Guide.
Temperature control
When the refrigerator is first turned on, the powerful cooling system will automatically cool both
■ ■
refrigerator and freezer compartments to their set temperatures. This will take between 2 – 3 hours.
The two compartment temperatures are accurately and independently controlled and do not
■ ■
change with the temperature or humidity of the surroundings; whether summer or winter.
If you wish to alter the temperature of either the fresh food compartment or freezer
■ ■
compartment, this can be easily done by using the Control panel located at the back of the fresh
food compartment.
Control panel to adjust temperatures
Fresh food and freezer
compartment indicator
Compartment
select button
Fresh food compartment
The fresh food compartment light on the refrigerator diagram will be showing. The temperature
■ ■
indicator illustrated by a thermometer will show the temperature setting for this compartment
as a series of lights.
The temperature may be altered by pressing the
■ ■
buttons will produce a dimmer light which indicates a small change in temperature.
Pressing either button twice gives a brighter light and indicates a greater change in temperature.
■ ■
Fewer lights on the thermometer means a cooler temperature for the compartment selected.
Freezer foods compartment
To adjust the freezer temperature press the
■ ■
compartment indicator.
The freezer temperature can be altered by pressing the
■ ■
One press on either of these buttons will produce a dimmer light which indicates a small change
■ ■
in temperature. Pressing either button twice gives a brighter light and indicates a greater change
in temperature.
Note: successively pressing the
a return to the fresh food compartment will be accompanied by a longer beep.
When the door is reopened the control panel will return automatically to the fresh food
■ ■
compartment setting.
Active Smart™ operating instructions
button will automatically select between the compartments,
Increase temperature button
Decrease temperature button
Fig.4 Control panel
or
buttons. One press on either of these
button until the light flashes on the freezer
or
buttons.
Temperature indicator
(thermometer)
US
9
CA

Publicité

Chapitres

Table des Matières
loading

Table des Matières