Wall mounting advice
• In order to avoid damage to the equipment and personal injury you should get a
qualified person to drill the fixing surface and fit the appropriate wall fixings.
• Take care not to allow the main unit to fall while attempting to hook onto the wall
mount brackets.
• Before mounting, check the wall strength; consult qualified personnel if
necessary.
• When drilling into walls, always check that there are no hidden wires or pipes
etc.
• Make sure the screws and wall plugs are suitable for supporting the unit.
10. Specification
Amplifier
Power output
Frequency response
Input sensitivity
Main unit
Power supply
Power consumption
Standby power consumption
Full range speaker drivers
Subwoofer
Dimensions
Cable length
Remote control
Battery
Bluetooth
Bluetooth compatibility
Bluetooth version
2X45W+90W
20Hz-20KHz ± 3dB
550 mV
Input:100-240V ~ 50-60Hz
Output: 24V 1.5A
25W
≤ 0.5W
Impedance: 4 Ohm, 45mm (1.75")
Frequency response: 250Hz ~ 20KH
Impedance: 8 Ohm, 135mm (5.25")
Frequency response: 45~250Hz
Sound Bar: W920xD55xH85 mm
External subwoofer: W170xD221xH296 mm
1.5m
1 x CR2032
EDR, A2DP, AVRCP
2.1
- 32 -